SPHERISCAN LAMP SCANNER CLAY PAKY
Spheriscan is a revolutionary scanner with a modern twist. The Spheriscan’s pan rotation does not have an end-stop: its mirror goes on turning endlessly beyond 360 degrees, which creates an absolutely original swirling effect. Its speed may be adjusted as desired and reach a maximum of 250 rpm, that is more than four revolutions per second! Spheriscan is without a doubt much more powerful and brighter than any of the other scanners that came before it. Its spanking new OSRAM lamp works at 1200 W. Spheriscan features a 13°-34° high speed zoom, 1 rotating gobo wheel with 6 gobos, 1 fixed gobo wheel with 8 gobos, a rotating prism, a fast sixteen-blade iris, a linear frost filter, CMY system, a 7-color wheel. A RGB system, built into the top head, turns it into a glowing transparent dome. Three dedicated DMX channels allow for unlimited colors. Spheriscan is built to be used outdoors (IP54). Using a special optional support system, Spheriscan may be recessed into the stage floor, with only its transparent head visible, to create original gazing projections. Lastly, you can also use the Spheriscan to project light directly, without the mirror (SPHERILIGHT configuration). Spheriscan is therefore a tribute to the past with an endless variety of state-of-the-art technical features. It is a powerful effects light capable of adding a new distinctive touch to shows and an appliance you can use on many occasions, including big events, indoor and outdoor concerts and architectural installations.
FEATURES
- 1400W OSRAM lamp (6000 K) working at 1200W
- 80mm front lens diameter
- 13°-34° Zoom
- Mirror turning very fast over 360° and without stop (250rpm)
- CMY System +7-color wheel
- 3 RGB leds under the dome
- 6 rotating gobos + 8 fixed gobos
- 8-facet rotating prism
- 16 blades fast iris
- Variable frost
- Fast stop/strobe effect
- Art-Net / RDM
- High performance electronics and firmware
- IP54 Protection rating (the first moving mirror light for Outdoor use)
- Conversion into Spherilight configuration (without mirror) to project light directly
- It may be recessed to create original grazing projections
SPECIFICATIONS
Power
|
AC power input Neutrik PowerCON TRUE1 (IP65) 200/240V 50/60 Hz
|
Input Power
|
1600 VA
|
Light Source
|
OSRAM Lok-it 1400-PS Lamp, working at 1200W
|
Optics
|
80mm front lens diameter 13°-34° Zoom range Electronic Focusing
|
Color System
|
CMY System Color Wheel with 7 color filters Three R+G+B LEDs incorporated into the glowing transparent dome
|
Effects Section
|
Wheel with 6 interchangeable and indexable rotating gobos (26mm diam. image) Wheel with 8 static gobos (25mm diam. image) 8-facet Rotating prism 16 blades fast Iris Variable "heavy" frost filter Very precise 0-100% dimmer Fast stop/strobe effect
|
Control and Programming
|
31 or 35 DMX 512 control channels DMX protocol signal: USITT DMX 512 ART-NET Display: LCD 128 x 64 bit, backlit LED, white on black Pan and Tilt Resolution: 16 bit Focus Indexing Resolution: 16 bit Dimmer Resolution: 16 bit Rotation gobo Resolution: 16 bit Movement control: vectorial DMX signal connection: 5 pole XLR input and output Software upload through DMX input / Ethernet input
|
Body
|
Aluminium and steel structure with plastic cover Circular handle and moving bracket for transportation IP54 protection rating It is possible to convert the fixture into SPHERILIGHT (C11270) to project light directly. In this configuration, the fixture may be protected to IP54 by fitting an optional transparent cover over the front lens (C21092)
|
Moving Body Pan
|
PAN Angle Rotation: 360° continuous rotation Fast speed: 717 ms Normal Speed: 5442 ms Resolution PAN: 1.4118° Resolution PAN FINE: 0.0055°
|
Tilt
|
Angle Rotation: 60° Fast speed: 239 ms Normal Speed: 1174 ms Resolution TILT: 0.2353° Resolution TILT FINE: 0.0009°
|
Electronics
|
Long life self-charging buffer battery. Function reset from control unit ON/OFF lamp control from the lighting desk. Function reset from the lighting desk. "AUTOTEST" function from menu. Electronic monitoring with status error. Cooling system monitoring. DMX level monitoring on all channels. Internal data transmission diagnostics. Firmware Upgrade with no power. Firmware upload from another fixture.
|
Support
|
±45° swivel bracket movement Circular handle and moving brackets for transportation Optional handles allow the fixture to be ground recessed for grazing projections
|
Safety Devices
|
Automatic break in power supply in case of overheating Forced ventilation with fans
|
Working Position
|
Vertical or horizontal ±45° Working Position to ensure IP54 Hanging system: with fast-lock omega clamps (1/4 turn) on bracket
|
Weight
|
31.5 Kg (69.4 lbs) 35 Kg (77 lbs) with brackets
|
Hurry! only 13 items left in stock.
ALV France delivers its products across France and internationally through a logistics service tailored to professionals. Shipments are handled by trusted transport partners selected for their reliability. Equipment is dispatched from our 1,000 m² site, which includes a storage warehouse, a technical support workshop, and a showroom — ensuring optimal responsiveness.
Before shipping, each item is thoroughly tested, inspected, and serviced by our technical team. Upon request, a personalized tracking service can be arranged to meet your organization’s specific needs.
- Shipping in France and internationally
- Trusted transport partners
- Physical stock ready for fast dispatch
- All equipment tested and inspected before shipping
- Custom logistics tracking available on request
For any delivery-related questions or specific needs, our team is at your disposal.
16 other products in the same category: