K25 B-EYE MOVING HEAD LED CLAY PAKY

Clay Paky HY B-EYE K25 LED Moving Head Wash

The HY B-EYE K15 and K25 are the logical continuation of the successful B-EYE series, but due to the 40W RGBW LEDs used many times brighter than its predecessors. The HY B-EYE series is also versatile and can be used as wash or beam light. The wide range of spectacular effects leaves nothing to be desired in terms of creativity.

The B-EYE convinces as a wash light with excellent colors, an extremely homogeneous illumination, a variable CTO and an impressive zoom range of 4°- 60°. The rotatable and indexable front lens also enables impressive kaleidoscope and beam effects. Virtual gobos are used to actively change the beam defined with 4°, in the projection, also the colors of the gobos and their backgrounds can be individually adjusted, allowing multi-color projections. With the digital, rotatable and indexable beam shaper (e.g. Ovalizer), the shape of the beam can also be adjusted to illuminate specific areas of the stage.

Features

• 1.480W RGBW-LED
• Versatile use: wash, beam, FX-effects
• Rotating front lens for countless kaleidoscope and beam effects
• Narrow beam due to parallel micro beams
• LEDs individually controllable
• Very homogeneous illumination
• Virtual gobos for impressive effects
• Zoom: 4° - 60
• Digital beam shaper (e.g. Ovalizer)
• Color temperature variably adjustable
• Very quiet operation

Technical Data

Light Source and Effects

• Light source: 37x RGBW LEDs driven at 40 Watt
• Light source type: OSRAM OSTAR - Stage II LE RTDUW S2WN
• Color Temperature: 6,000 K
• Life: 50,000 hrs
• Zoom: 4° - 60°

Effects

• Three operating modes: wash, beam, FX (Kaleido effects)
• Bi-directional Rotating Front Lens
• Digital Wash-Beam Framing effect
• Beam edge softening control (in Wash mode)
• Pixel Patterning Macros with enhanced control
• 0-100% linear electronic dimmer
• Adjustable speed stop/strobe effect, with instantaneous blackout
• Dedicated channel for color temperature setting
• White CT Emulation 2500-8000K
• RGBW auto-tuning to lamp CT Emulation
• Tungsten Lamp Emulation
• Slow Strobe: 1 flash/sec; Fast Strobe: 25 flash/sec

Control and Programming

• 22/36/111/148 DMX channels
• Basic Engine (Standard and Shape Mode)
• Pixel Engine (RGB and RGBW Mode)
• DMX protocol signal: USITT DMX 512
• Art-Net / RDM
• Arkaos Kling-Net protocol already included in the firmware
• Display: Graphic LCD backlit b/w Display
• Pan: 540°
• Tilt: 210°
• Pan/Tilt Resolution: 16 bit
• Dimmer Resolution: 16 bit
• Movement control: vectorial
• DMX signal connection: 3 and 5 pole XLR input and output
• Software upload through DMX input

Electronics

• Power supply: 100-240V 50/60Hz
• Input power: 1250 VA at 230Vac 50Hz
• Ethernet ready with RJ45 socket
• Display: backlit black-and-white graphic LCD display
• Electronic check-up of every single parameter with error alarm
• DMX level monitoring on each channel
• Automatic internal data transmission error diagnostics
• Firmware upgrade even when the unit is not connected to the power supply
• Firmware transfer from one light to another

General

• Housing: Aluminium structure with die-cast plastic cover
• Hanging system: with fast-lock omega clamps (1/4 turn) on the base
• Dimensions (WxDxH): 488 x 387 x 482 mm
• Weight: 27,5 kg

Scope of Delivery

• 1x HY B-EYE K25
• 2x Omega Clamps
• 1x PowerCon cable without power plug