VIPER WASH DX LYRE MARTIN

• Approved lamp: Osram HTI 10 00 / PS Lok-it
• Type: 10 00W short arc with discharge
• Color temperature: 6000K
• CRI (Color Rendering Index):> 85
• Average life: 750 hours
• Base: PGJ28 Lok-it
• Ballast: Electronic

• Color mixing: CMY, independently variable from 0 to 10 0%
• Color temperature control: progressive CTO from 6000 to 3200 K
• Dimmer / mechanical shutter: Dimming continuous 0- 10 0%, variable and random strobe mode
• Dimming options: choice of 4 dimming curves
• Pan: 540 °
• Tilt: 268 °
• Position correction system: Absolute position encoder

• DMX Channels: Under specification
• Parameter setting and addressing: Menu on extended display and scrolling jog or via DMX
• Control 16-bit: Under specification
• DMX compatibility: USITT DMX 512-A
• RDM compatibility: ANSI / ESTA E1.20
• Receiver: opto-isolated RS-485
• Software update: by USB key or USB / DMX interface on the DMX line
• Specifications MAC Viper Wash TM 1

• Device identification: Customizable identification number

• Max. total output: 33,000 lm
• Angle width: 13.5 ° - 59 °
• Preliminary data

• Black color
• Shell: Fiber reinforced composite material and UV resistant
• Reflector: parabolic glass
• Protection factor: IP20

• Attachment points: 8 attachment points for 1/4 turn latches
• Orientation: all
• Minimum distance to illuminated surfaces: 3.4 m
• Minimum distance to combustible materials: 0.3 m

• Mains input: Neutrik Powercon
• DMX and RDM data In and Out: 5 pin
• USB access: Socket on base

• Alternating current: 120-240 V nominal, 50/60 Hz
• Power supply unit: electronic auto detection of the mains
• Typical current draw, half period RMS: 16.2 A

• 120 V, 60 Hz: 1225 W, 10 .3 A, PF 0.999
• 208 V, 60 Hz: 1190 W, 5.8 A, PF 0.996
• 230 V, 50 Hz: 1186 W, 5.2 A, PF 0.994
• 240 V, 50 Hz: 1194 W, 5.0 A, PF 0.993
• Measurements made at nominal voltage. With a possible deviation of +/- 10%
• PF = power factor

• Cooling: filtered, ventilated (temperature regulation, low noise)
• Maximum ambient temperature (Ta): 40 ° C
• Minimum ambient temperature: 5 ° C
• Maximum surface temperature: 150 ° C
• Total heat dissipation (calculated, +/- 10% at 120 V, 60 Hz): 4180 BTU / h

• EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
• EU CEM: EN 55015, EN 55 10 3-1, EN 55 10 3-2, EN 61547

Physical description :