MAC AURA XB WASH MARTIN LED

Specifications

Physical data

- Length: 302 mm with the lyre
- Width: 302 mm with the lyre
- Height: 360 mm, head forward
- Weight: 6.0 kg

Dynamic effects

- Beam, color composition: RGBW
- Aura ( LED ), color composition: RGB
- beam color temperature control: CTC adjustable 10 000-2 500K
- Beam and aura electronic color wheel: 33 LEE referenced colors plus white, spinning wheel effect and random colors
- Independent shutter effects: Electronic with pulsating and random effects, regular strobes and explosions
- Pre-programmed effects: Range of independent and syncable effects on beam and aura, two combinable
- Electronic dimmer: Independent on aura and beam, four dimming curves
- Zoom: 11° - 53° (at 1/ 10 ° flow)
- Pan: 540°
- Tilt: 232°
- Pan and tilt speed: Adjustable on the control panel or by DMX

Optics and photometric data

- Sources: 15W RGBW matrices
LED refresh rate: Beam: 1200 Hz, Aura: 4395 Hz
- Minimum lifespan: 50000 h (luminous flux > 70% of the initial flow)
- Total luminous flux (zoom wide, flow 1/ 10 ): 4.6 klm
- Total luminous flux (zoom tight, flow 1/ 10 ): 3.8 klm
- Video compatibility: Designed for use with HD/high frequency cameras
*Manufacturer data obtained under manufacturer's test conditions

Control and programming

- Control options: Independent or synchronized beam and aura control
- Control: DMX, RDM
- Resolution: 8 bits, pan and tilt control in 16 bits
- DMX channels: 14/25
- Addressing and personality: Control panel with backlit graphic display
- DMX compatibility: USITT DMX512-A
- RDM compatibility: ANSI/ESTA E1.20 RDM
- Transducer: RS-485
- Software update: By DMX with Martin USB Duo DMX interface

Construction

- Black color
- Casings: Thermoformed flame retardant plastic UL 94 5VA
- Protection index: IP 20

Installation

- Fixing point: One M12 threaded hole for standard hook
- Orientation: All
- Minimum distance to combustible materials: 200 mm from the head,
- Minimum distance to illuminated surfaces: 1 m
- Placement: Indoor only, must be fixed to a surface or structure

Connections

- Power supply: Neutrik PowerCON True1 NAC3PX dual mains socket
- Power header accepts Neutrik PowerCON TRUE1 NAC3FX-W connectors
- The power copy base accepts Neutrik PowerCON TRUE1 NAC3MX-W connectors
- DMX input/output: 5-pin XLR locking

Electrical data

- 10 0-240 V nominal, 50/60 Hz
- Maximum power consumed: 400 W
- Power board: Self-adaptive switching
- Standby consumption: - inrush current RMS 1/2 typical cycle: 10 .7

Typical power and current

- 10 0 V, 60 Hz: 389 W, 3.8 A, mp 0.99
- 120V, 60Hz: 355W, 3.2A, PF 0.99
- 208V, 60Hz: 350W, 1.8A, PF 0.97
- 230V, 50Hz: 349W, 1.7A, PF 0.95
- 240V, 50Hz: 349W, 1.6A, PF 0.95
PF = power factor. Measurements at nominal voltage, all LED at full power. Consider a variation of +/- 10 %.

Thermal data

- Cooling: Forced air (temperature regulated, low noise, configurable speed)
- Maximum ambient temperature (Ta max.): 40° C
- Minimum ambient temperature (Ta min.): 5° C
- Total dissipation (calculated, +/- 10%): 1230 BTU/hr.

Approvals

- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
- EMC Europe: EN 55 10 3-1, EN 55 10 3-2, EN 55015, EN 61547

Supplied accessories

- M12 hardware for Martin™ hooks
Note that cables and connectors must be ordered separately.

Accessories

Power cables

- Mains cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, with PowerCON TRUE1 NAC3FX-W female connector, 3 m P/N 11541513
- Power copy cable, 16 A, 14 AWG, SJT, 1.5 mm2, H05VV-F, with PowerCON TRUE1 male (copy) and female (input) connectors, 3 m P/N 11541512

Power connectors

- PowerCON TRUE1 NAC3FX-W Power Connector P/N 05323416*
- Power feedback connector, PowerCON TRUE1 NAC3MX-W P/N 05343418*
*Please note that the fourth and last digits of these two order codes are different

Bindings

- Set of 5 quick fasteners P/N 91606018
- Hook GP/N 91602003
- Hook with jaw (half collar) P/N 91602005
- Quick trigger hook P/N 91602007
- Safety sling, universal, WLL 50 kg P/N 91604003

flight case

- Flight case for 6 MAC Aura™ P/N 91515020

Related accessories

- Martin USB Duo DMX Interface Box™ P/N 907030 10
- Martin DMX 5.3 Splitter™ P/N 90758140
- Martin RDM 5.5 Splitter™ P/N 90758150