Second hand KUDO SYSTEME COMPLET View larger Photo non contractuelle

KUDO COMPLETE SYSTEM L-ACOUSTICS

KIT KUDO L-ACOUSTICS - 2756

Used

COMPLETE KUDO SYSTEM

COMPOSED OF:
- 18 X KUDO SPEAKERS WITH COVERS AND TRAYS
- 08 X SUB SB218 L-ACOUSTICS WITH COVERS AND TRAYS
- 05 X RACK OF AMPLIFIER LA 48 AND BSS FDS366T PROCESSOR ...

DETAIL OF THE COMPLETE KIT: SEE DESCRIPTION

REVISED MATERIAL CHECKED - ORIGINAL PAINT REMADE
3 MONTH WARRANTY

More details

This product is no longer in stock

30 000,00 €


30 000,00 €tax incl.

More info

COMPLETE KIT INCLUDING :

- 18 X KUDO SPEAKERS WITH COVERS AND TRAYS

- 08 X SUB SB218 WITH COVERS AND TRAYS

- 03 X RACKS OF 04 X LA 48 WITH 02 X PAD 02K PANEL AMPLI

- 02 X RACK WITH BSS FDS366T PROCESSOR + 02 X LA48 AND PAD02

- 01 X RACK WITH BSS FDS366T + C06 CONTROL PROCESSORS

- 02 X BUMPERS KUDO

- 01 X COMPLETE WIRING KIT

MORE

- LINE ARRAY L-ACOUSTICS HANGING KIT INCLUDING :

PELICASE CASE:

- 1 X PCMCIA CARD BSS 366 KUDO PRESETS BSS OMNIDRIVE

- 01 X EXPLODED CANNON / 6 X XLR MALE

- 01 X BAG OF PIN FOR THE KIT

- 02 X JACK BANTAM / XLR MALE

- 02 X BAMTAM / XLR FEMALE JACK CONNECTOR

- CAP KIT (COM CON NEC TOR)

- 01 X DOUBLE DECAMETER

- 01 X SPOTLIGHT 7 X 26

- 01 X INCLINOMETER

- 02 X BUBBLE LEVELS

KUDO® is a large format line source operating on a band between 35 Hz and 20 kHz. The frequency response of the system can be extended to 32 Hz or even 25 Hz with the SB18 or SB28 bass reinforcements, respectively.

The quad-amplified 3-way loudspeaker features two 12 '' transducers tuned in a bass-reflex enclosure for the low register and 4 high-efficiency 5 '' medium transducers. The treble section features two coupled 1.75 '' diaphragm compression chamber motors with two DOSC® waveguides.

A directivity process adjustable by deflectors * allows you to adjust mechanically the directivity of the medium / acute sections in the plane perpendicular to the DOSC® and offers four different angles of coverage. The alliance of a coplanar geometry and the guide DOSC® waveform reserved for high frequencies allows the five criteria of the WST® to be fulfilled.

The KUDO® loudspeaker is constructed from premium Baltic birch plywood for integrity optimum mechanics. Its four point attachment system is totally captive and integrated in the carpentry. Made of high resistance steel, it can hang up to 21 Variable curvature vertical source line KUDO® enclosures with angular flexibility between enclosures from 0 to 10 ° in 1 ° increments. In addition it allows the use of the KUDO® online source horizontal at constant curvature with an inter-element angle of 10 °.

The KUDO® loudspeaker is controlled and amplified by the dedicated L-ACOUSTICS LA8 controller which ensures active linearization, transducer protection and optimizes two operating modes:

• Line Source “LARGE BAND” mode for use without bass reinforcement.

• Line Source mode “HIGH PASS” for use with bass reinforcement or in addition to broadcasting

Each of the two modes offers three variations of presets optimizing the tonal balance according to the the position of the deflectors to 50, 80 or 1 10 degrees. The performance of a KUDO® speaker depend on the preset used and the configuration chosen.

Specifications :

Useful bandwidth (- 10 dB): 35 - 20 kHz - Preset [KUDOXX_25]

Nominal directivity (vertical line source) (-6dB):
Horizontal: Symmetrical 50 ° or 1 10 ° (± 5 °, 1 - 10 k Hz)
Asymmetrical 25 ° / 55 ° or 55 ° / 25 ° (± 5 °, from 1 - 10 k Hz)
Vertical: Function of the number of elements and the curvature of the Source Line between 0 ° and 10 ° in steps of 1 °

Max SPL level *: 140 dB (Preset [KUDO50])
* Peak level measured at 1m in free field with pink noise (crest factor of 10 dB) filtered by the specified preset.

Allowable long-term RMS power:
LF: 2 x 450 W
MF: 312 W
HF: 75 W

Transducers:
Bass: 2 x 12 '' treated against humidity, impedance 2 x 8 ohms
Medium: 4 x 5 '' high efficiency, 8 ohm impedance
Treble: 2 diaphragm compression chamber motors of 1.75 '', impedance 8 ohms

Hanging *:
Entirely captive, made of high resistance treated steel
Vertical: angular steps of 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 °, certified for 21 KUDO®
Horizontal: constant step of 10 °, certified up to 6 KUDO® by K-LIFT
* Refer to the user manual and to the SOUNDVISION software concerning the limits of use

Physical data:

W x H / H x D: 876 x 356 x 689 mm
Weight (net): 87 kg
Connections: 2 PA-COM® 8 pts sockets
Materials: Baltic birch plywood 15, 18 and 30 mm
Finish: brown-gray paint RAL 8019®
Front: steel grille with polyester powder coating, acoustically neutral Airnet® fabric
Rigging: fully captive

30 other products in the same category: