8XTI ENCEINTES L-ACOUSTICS

12XTI L-ACOUSTICS SPEAKERS

L-ACOUSTICS
7139-160- 2

L-ACOUSTICS 12XTI (INSTALLATION VERSION)

2-way coaxial speaker (12 inches + 1 x HF 3 x inches)

Delivered with lyre

Perfect condition from fixed installation

Out of Stock
€800.00
Tax excluded
  Checked and tested equipment

All our products are inspected, tested, and checked by our technicians before shipping.

  Fast & secure shipping

Shipping within 24/48h from our warehouse. Delivery in France and internationally.

  Dedicated customer service

A team available to support you before and after your purchase, with personalized advice.

The 12XTI active / passive loudspeaker is the middle part of the L-ACOUSTICS ® XT coaxial series operating on the 55 Hz - 20 kHz frequency band. The frequency response can be extended up to 32Hz by including the SB18 subwoofer boost.

The loudspeaker comprises the coaxial assembly of a 12 '' LF speaker tuned in a bass-reflex enclosure, and a 3 '' diaphragm compression chamber HF motor loaded by the cone of the 12 ''. In the passive configuration, the filtering between the transducers is of the third order. The active linearization of the transducers and their protection results from a combination of parameters administered in the amplified controllers.

The coaxial configuration of the transducers defines an axisymmetric 90 ° polar coverage without side lobes over the entire coverage range.

Made from premium Baltic birch plywood, the cabinetry has been designed for versatile use of the enclosure. Two cut sides allow monitoring with two listening angles of 30 ° and 60 ° from the vertical. The 12XT loudspeaker can also be mounted on a stand thanks to the integrated base or hung using the complementary accessories ETR12-2, XTLIFTBAR or Omnimount®.

The 12XTI loudspeaker is controlled by L-ACOUSTICS ® amplified controllers which optimize three operating modes in active or passive configuration (selectable by the active / passive switch located behind the grille):

  • The '' WIDE BAND '' mode where the 12XT speakers are used alone on their nominal bandwidth (presets [12 XTA _FR], [12 XTA _FI], [12 XTA _MO], [12XTP_FR], [12XTP_FI] and [12XTP_MO] ])
  • The '' HIGH PASS '' mode filtered at 10 0 Hz to include a possible SB18 sub-bass supplement (same presets as above with the extension '' _ 10 0 '')

In each mode we distinguish the 3 presets [FRONT], [FILL] and [MONITOR] corresponding respectively to front, distributed, or half-space configurations.

The performance of a 12XT speaker depends on the preset used and the configuration chosen.

Specifications:

Useful bandwidth (- 10 dB): 55 - 20k Hz (Preset [12 XTA _FR])
Nominal directivity (-6dB): 90 ° Axisymmetric
Max SPL level *: 133 dB (Preset [12 XTA _FI])
* Peak level measured at 1m in free field with pink noise (crest factor of 10 dB) filtered by the specified preset.
Long-term permissible RMS:
12XT Passive: 380 W (preset [12XTP_FI])
12XT Active: LF: 290 W - HF: 135 W (preset [12 XTA _FI])
Transducers:
LF: 1 x 12 '' speaker treated against humidity
HF: 1 x 3 '' motor with compression chamber and diaphragm
Nominal Impedance: 8 ohms (passive), 2 x 8 ohms (active)
Physical data:
H x W x D: 540 x 4 10 x 389 mm - 21.3 x 16.1 x 15.3 in
Tilt: 30 ° or 60 ° from vertical
Weight (net): 29 kg - 63.9 lbs
Connections: 2 x Speakon® 4-point
Materials: Baltic birch plywood 18, 24 and 30 mm
Finish: Gray brown RAL 8019®
Front: steel grille with polyester powder coating, acoustically neutral Airnet® fabric
Attachment: integrated handle and foot base, Omnimount® compatibility, ETR12-2 bracket and optional XTLIFTBAR accessory
L-ACOUSTICS
: 7139-160- 2
Out of Stock

Data sheet

Type
Sonorisation

ALV France delivers its products across France and internationally through a logistics service tailored to professionals. Shipments are handled by trusted transport partners selected for their reliability. Equipment is dispatched from our 1,000 m² site, which includes a storage warehouse, a technical support workshop, and a showroom — ensuring optimal responsiveness.

Before shipping, each item is thoroughly tested, inspected, and serviced by our technical team. Upon request, a personalized tracking service can be arranged to meet your organization’s specific needs.

  • Shipping in France and internationally
  • Trusted transport partners
  • Physical stock ready for fast dispatch
  • All equipment tested and inspected before shipping
  • Custom logistics tracking available on request

For any delivery-related questions or specific needs, our team is at your disposal.

16 other products in the same category: